We produce well detalied, unique, hand-made N scale signals for advanced railroad modellers. The combination of the signal plates
and aspects are choosen by the customer.
Our signals have sensitive brass body. Therefore you should be very careful when you install them.
You should be also very careful with the wires beacuse of the sensitive dielectric paint (japan).
These products aren't toys. Not suitable for children under 14 years!
Before the installation you should check the functionality of your signal. Please connect the wire with black marker (it has a diode anyway) to one of the terminals of a 16V AC transformer (it is for accessories) or a positive pole of a DC transformer with voltage between 9 and 12V.
Then connect the other wires (having resistors) one by one to the other terminal/pole. It results that the apropriate light lights up. Any other case refer the Troubleshooting section.
To mount your signal you should drill a hole of 6mm diameter. Then pull the wires through the hole one by one. After this you can fix the signal with some adhesive (not included).
Please be very careful with these operations.
More lights are lighting
When more lights light up instead of one, please check if a wire nestle another. It is also possible that the dielectric paint is damaged. In this case please contact us at info (at) booci.hu.
Light is not lighing
If a light doesn't light up, please check if the wire of the light is connected properly. It is also possible that the dielectric paint is damaged or the wire is broken inside the signal. In this case please contact us at info (at) booci.hu.
